HAULNSS LOGO

HAULIN SS...even when standing still...

OWNED BY: CHAD, PREZIDENT/OWNER

 It's called HAULNSS.  Why?  Because it's an SS that HAULS!  Or, is it just HAULIN' A**?!  Anyway, if it ever passes you on the highway, you'll figure it out...in a hurry!  I've had this car since I turned 16, and  yes, it was my first car.  As it sits now, it's got about 150,000+ miles on it and you don't get that from ridin' around to shows on a trailer!  It's been shown in Arizona, California, Texas, Indiana, and here in Michigan and has driven every mile of it to and from.  I've done pretty well with it at a lot of decent sized shows.  It won it's class at Super Chevy Shows for 3 years and was featured on ESPN-2's coverage of the 1998 Martin Michigan show.  It won BEST EL CAMINO sponsored by the ORIGINAL PARTS GROUP at the '99 event, and I was lucky enough to place second with it at the 14th annual Chevy Madness Show at Six Flags in So. Cal. in a much less customized form.  It was shown in the Reader's Rides section of Sport Truck Magazine in '95.  To date it has won about 25 first place awards, 8 seconds, 3 thirds, one best interior, one best engine, and two best paint's.  It's gone through many changes over the past years and all have been performed by myself with some help from a few good friends.  Most of the changes have been for the better I hope.  It's been a long term project and has taken a long while to get it to where it's at today.  It's not perfect...far from it if you ask me.  There's always something that needs to be done, or re-done in a lot of cases because you're never finished!  But, it's definitely one-of-a-kind!  So ENJOY!  And if there is anything else you'd like to know, feel free to E-MAIL me!


EXTERIOR MODIFICATIONS:  

'83 CHEVY EL CAMINO  'Glass Roll Pan, '85 T/A Wing, Billet Taillight Covers, Shaved Emblem.  Chrome Plate Bucket.

  HAULIN SS

NOSE MODS: Molded Cowl Hood, Hand-made billet grille, '87 Celebrity Composite Headlamps, Shaved ornament, 'Glass air-dam w/frenched projector lights.

 

SIDE ACCESS TAILGATE  TAILGATE Actually opens about a foot.  I wanted it to look stock when closed.

The First Graphics Scheme.  Not bad I guess.  Replaced Stainless Rocker Panel Trim.  Designed the graphics on a photo FIRST!

-MOLDED COWL INDUCTION HOOD SCOOP
-SHAVED HOOD ORNAMENT, EMBLEMS, TRIM, ANTENNA, and MARKER LIGHTS
-HAND-CRAFTED BILLET GRILLE INSERT
-'87 CELEBRITY COMPOSITE HEADLAMPS W/ APC HYPERBLUE BULBS
-CREATIVE AUTOMOTIVE IROC-SS FIBERGLASS AIRDAM with FRENCHED ROADBOY ION-PROJECTOR DRIVING LAMPS

-SIDE-ACCESS TAILGATE

-FIBERGLASS ROLL PAN

-CUSTOM-MADE SLOTTED BILLET TAILLIGHT COVERS

-HARD TONNEAU COVER with REAR WINDOW ILLUMINATION LAMPS

-BILLET SPECIALTIES BOWTIE PLATE FRAME

-TONNEAU MOUNTED '85 TRANS-AM WING

-UNDER CAR NEON KIT and PLATE FRAME

-APC FRONT & REAR STROBES

-PPG DELTRON 2000 LIGHT MAPLE METALLIC, ULTRA-BRIGHT SILVER, LOW-STRENGTH BLACK AIRBRUSHING, and PPG CONCEPT DCU 2055 CLEAR with HOUSE OF KOLOR CARDINAL RED STRIPING by THE OWNER

DRIVETRAIN MODIFICATIONS:

GMPP ZZ-3  Note the A/C compressor is now the main Air-Ride supply.

 -G.M. PERFORMANCE PARTS ZZ-3 H.O. 350 rated at 345 H.P. and 387 LB./FT.

-TCI STREETFIGHTER TH-350 TRANSMISSION with a TCI SATURDAY NIGHT SPECIAL TORQUE CONVERTOR
-HOLLEY STREET AVENGER 670 C.F.M. CARBURETOR and FUEL PRESSURE REGULATOR 
-DYNOMAX CERAMIC COATED HEADERS flowing through 2.5" ALUMINIZED TUBING, FLOWMASTER 3-CHAMBER MUFFLERS, and CHROMED TIPS TERMINATING IN FRONT OF THE REAR AXLE
-GM 3.73:1 LIMITED SLIP REAR END 

SUSPENSION MODIFICATIONS: 

-BELL TECH 2" DROPPED SPINDLES

-FIRESTONE 255C 2500# AIRBAGS FRONT & REAR

-12 GALLON AIR TANK, (2) EASY STREET/VIAIR 150 PSI COMPRESSORS; CONVERTED FACTORY A/C COMPRESSOR TO AIR COMPRESSOR, 3/8" NYLON D.O.T. TUBING, 12 VDC ELECTRIC SOLENOID FAST VALVES, REMOTE PANCAKE FUNCTION

-FRONT AND REAR SWAY BARS with ENERGY SUSPENSION URETHANE BUSHINGS
-RANCHO GT FRONT & REAR SHOCKS
-BF GOODRICH COMP-TA ZR RADIALS: 225/45/ZR17 FRONT; 255/40/ZR17 REAR
-EAGLE ALLOYS 203 BILLET ALUMINUM WHEELS: 17x7 FRONT; 17x8 REAR
-BOWTIE VALVE CAPS

INTERIOR MODIFICATIONS:

  The headliner often goes un-noticed due to the low stance of the truck.  It's 1" proud made of foam and took nearly 4.5 hours to do.   

-CYBERDYNE DIGITAL GAUGES installed in custom billet aluminum bezel
-CUSTOM PAINTED GRANT GT STEERING WHEEL with BILLET ALUMINUM ADAPTER and BOWTIE HORN BUTTON

-CUSTOM PAINTED '87 MONTE CARLO SS DASH PANELS

-B&M MEGASHIFTER with SHORT-STICK and HAMMER T-HANDLE with hand-painted shifter position indicator
-RECARO LSB BUCKET SEATS with POWER RECLINE
-HP RACING CHROME AND RED PEDAL COVERS
-BILLET SPECIALTIES ALUMINUM CRUISE CONTROL STALK COVER
-Hand-made CENTER CONSOLE with ARM-REST, storage compartment, custom BILLET aluminum switch panel, and hand-painted heater controls

-Lots of CRANBERRY TWEED and BURGUNDY VINYL

-GIANT 1" RAISED TWEED BOWTIE HEADLINER
-CUSTOM SPEAKER PODS & PAINTED DOOR PANELS
-VPA POWER WINDOW KIT

-'97 MONTE CARLO REAR VIEW MIRROR WITH MAP LIGHTS 

-290 WATT ALPINE, AMPLE, BBE, BLAUPUNKT, and PIONEER SOUNDSYSTEM

ALL MODIFICATIONS TO VEHICLE PERFORMED BY THE OWNER......WITH A LOT OF HELP FROM A FEW GOOD FRIENDS!!!

-BACK TO RIDES-